On AIX, uv_fs_event_start() didn't always initialize
handle->dir_filename. In this scenario, uv_fs_event_stop()
would free the uninitialized pointer. This commit
initialized handle->dir_filename to NULL in all cases.
Fixes: https://github.com/nodejs/node/issues/13577
PR-URL: https://github.com/libuv/libuv/pull/1400
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Instead of gettimeofday which is too heavy for a fast
monotonic clock implementation.
PR-URL: https://github.com/libuv/libuv/pull/1394
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Certain systems like z/OS have more than one bit turned
on for POLLIN events. (e.g. #define POLLIN 0x03).
Asserting that all bits are turned on would be invalid.
Instead, assert that *any* of those bits are turned on.
PR-URL: https://github.com/libuv/libuv/pull/1390
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Like the previous commit, except now the signal mask is reset instead
of the signal disposition. This does open a race window where blocked
signals can get delivered in the interval between the pthread_sigmask()
call and the execve() call (and may end up terminating the process) but
that cannot be helped; the same caveat applies to the previous commit.
Fixes: https://github.com/nodejs/node/issues/13662
PR-URL: https://github.com/libuv/libuv/pull/1376
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Signal dispositions are inherited by child processes. Libuv itself
does not touch them (if you don't use uv_signal_start(), that is)
but the embedder might and probably does in the case of SIGPIPE.
Reset the disposition for signals 1-31 to their defaults right before
execve'ing into the new process.
Fixes: https://github.com/nodejs/node/issues/13662
PR-URL: https://github.com/libuv/libuv/pull/1376
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
atomic_cas_ptr() is for compare-and-swap pointer addresses.
So when building 64 bit:
1. `ptr` is used casted to a pointer value (4-byte into 8-byte).
2. atomic_cas_ptr reads 8-byte at `ptr` and returns
In the case of `uv_async_send`, if handle->pending is 0, cmpxchgi()
actually returns the value of the 4-bytes past handle->pending,
causing uv__async_send to never be called.
The modified test-async-null-cb.c hangs at uv_run in this case.
PR-URL: https://github.com/libuv/libuv/pull/1361
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Filter out anything that is not an IPv4 or IPv6 interface in
uv_interface_addresses().
PR-URL: https://github.com/libuv/libuv/pull/1387
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Fixes a race condition where if uv_read_stop was called shortly
after uv_read_start or a successful read and before the
uv_pipe_zero_readfile_thread_proc thread started,
that thread would call the blocking ReadFile call after the
HANDLE_READING flag had already been cleared.
Also ignores EINTR to be more consistent with unix
(although we generally don't expect to see this condition on windows).
PR-URL: https://github.com/libuv/libuv/pull/1322
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
Some of these compiler flags are not supported. So don't
use them.
PR-URL: https://github.com/libuv/libuv/pull/1373
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
File read or write from specified position will move file pointer on
Windows but not on POSIX. This makes Windows behave as other
supported platforms.
Ref: https://github.com/nodejs/node/issues/9671
PR-URL: https://github.com/libuv/libuv/pull/1357
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
The uv__get_osfhandle() function is a private functio of the
Windows subsystem, and its used to get a Windows HANDLE out
of a file descriptor number.
The motivation behind making this function public is to
allow Node.js programs to pass file descriptors created
using fs.open() to native Node.js C++ add-ons, and be able to
successfully convert them to Windows HANDLEs.
Refs: https://github.com/libuv/libuv/pull/1166
Refs: https://github.com/nodejs/node/issues/6369
Fixes: https://github.com/libuv/libuv/issues/1291
PR-URL: https://github.com/libuv/libuv/pull/1323
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
On Cygwin `recvmsg` always sets `msg_controllen` to zero on a
message received from a named pipe. Therefore we cannot use
`sendmsg` to send handles for ipc. Return failure early from
this code path as `ENOSYS`.
Skip tests requiring this feature since it is not available.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
On Cygwin a `connect` to a file that is not a socket fails
with `EBADF` instead of `ENOTSOCK` even though the former is
supposed to be for a bad socket fd. Translate the error.
This fixes the `pipe_connect_to_file` to file test.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
On Cygwin a named pipe closed by terminating a child process
may be reported via `ECONNRESET` on the next read. Teach
`uv__read` to interpret this as end of file.
This fixes the `spawn_and_kill_with_std` test.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Cygwin and MSYS2 are POSIX layers implemented on top of Windows.
Use our POSIX `poll(2)` implementation of our poll abstraction.
For most other components we already have dedicated sources
implementing them in terms of APIs available on Cygwin or
providing non-implementations of components not supported.
This leaves only three components that need Cygwin-specific
implementations:
* uv_uptime: implement using sysinfo
* uv_resident_set_memory: add a placeholder returning UV_ENOSYS
* uv_cpu_info: add a placeholder returning UV_ENOSYS
Update our test suite to account for features not available
due to Cygwin platform limitations or our placeholders.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
POSIX defines `poll()` as a portable way to wait on file descriptors.
Use it to provide an implementation of our poll abstraction for use
on platforms that do not provide a more specialized polling method.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
On Linux we read `/proc/self/exe` for the path to the executable.
Factor out a dedicated source file to make this implementation
available for use on other platforms that support it.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
On Linux we use `sysinfo(2)` to look up the load average.
Factor out a dedicated source file to make this implementation
available for use on other platforms that support it.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
On Linux we use `sysinfo(2)` to look up available memory.
Factor out a dedicated source file to make this implementation
available for use on other platforms that support it.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
On os390 we implement no support for fsevents. Other platforms may not
support fsevents either, so provide a dedicated source file to use in
this case.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
On SunOS we implement no support for proctitle. Other platforms may not
support proctitle either, so provide a dedicated source file to use in
this case.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
It was previously assumed that OOB data had to be
inlined but that is incorrect.
PR-URL: https://github.com/libuv/libuv/pull/1347
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Remove the kvm.h include since 38323c9fb replaced the use of kvm_open()
with sysctl(),
Conditionally check for kvm_open() on non-OpenBSD platforms so LIBS (and
libuv.pc) does not unnecessarily contain "-lkvm".
Fixes: https://github.com/libuv/libuv/issues/1340
PR-URL: https://github.com/libuv/libuv/pull/1344
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Basic implementation of uv__io_fork on z/OS.
As of now, since filesystem events are not supported,
skip all of those tests on z/OS.
PR-URL: https://github.com/libuv/libuv/pull/1303
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
__declspec(inline) is completely undocumented, as well
as unnecessary. The INLINE preprocessor macro is used
throughout libuv, so this simply replaces the only instance
of declspec(inline) with the macro version.
PR-URL: https://github.com/libuv/libuv/pull/1307
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
`int epoll_init()` declares a function that takes any number of
arguments, use `int epoll_init(void)` instead.
PR-URL: https://github.com/libuv/libuv/pull/1314
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: John Barboza <jbarboza@ca.ibm.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
"Fast" path in `uv_udp_send()` attempts to write the data straight away
without queueing the fd with epoll/kqueue/... However, in some cases
this is not possible when `sendmsg()` returns `EAGAIN`. In such event
libuv has to queue the fd anyway.
PR-URL: https://github.com/libuv/libuv/pull/1308
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Fixes deadstore in uv_pipe_bind as 'sockfd' is no longer used.
Fixes deadstore in test related to unused variables or missing
assert.
PR-URL: https://github.com/libuv/libuv/pull/1288
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
This goto target is only one line, and is only reached from
one place.
PR-URL: https://github.com/libuv/libuv/pull/1289
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
A call to GetShortPathName can fail as files are not guaranteed to
have short name. This adds support for such case.
Fixes: https://github.com/libuv/libuv/issues/1258
PR-URL: https://github.com/libuv/libuv/pull/1267
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Fixes a TODO in src/threadpool.c. Updates the Windows code to drop the
unused `loop` parameter in calls to uv_req_init().
PR-URL: https://github.com/libuv/libuv/pull/1091
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Added the uv_loop_fork() API that must be called in a child process to
continue using an existing loop. Internally this calls a uv__io_fork
function for each supported platform, similar to the way
uv__platform_loop_init works.
After this call, existing and new IO, async and signal watchers will
contiue working as before on all platforms, as will the
threadpool (although any threads it was using are of course gone).
On Linux and BSDs that use kqueue, existing and new fsevent watchers
will also continue to work as expected. On OS X, though, directory
fsevents will not be able to use the optimized CoreFoundation path if
they had already been used in the parent process, instead falling back
to the kqueue path used on other BSDs.
Existing fsevent watchers will not function on AIX or SunOS. This
could be relatively easily fixed by someone with AIX knowledge in the
future, but SunOS will require some additional work to keep track if
the watchers.
A new test file, test/test-fork.c, was added to contain fork-related
tests to verify functionality in the child process.
PR-URL: https://github.com/libuv/libuv/pull/846
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Remove the unused `nevents` parameter from `uv__async_event()`
and remove the indirection of having a separate `uv__async`
type. There is only one instance per event loop these days.
This incidentally removes the `assert(n == sizeof(val))` in a
Linux-specific code path that some users seem to hit from time
to time. The cause is not well-understood and I've never been
able to reproduce it myself. Presumably libuv gets an EAGAIN
when trying to read from the eventfd but when and why that
happens is unclear.
Since the byte count is unused, removing the assert seems safe.
Worst case, libuv sometimes iterates over the async watcher list
when it doesn't have to.
Fixes: https://github.com/libuv/libuv/issues/1171
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Supersedes: https://github.com/libuv/libuv/pull/1214
With strict-aliasing rules, a char* type can be cast to any other
pointer type. However, that does not necessarily mean char array
type. So instead of de-referencing a char array, use a union with an
additional char member for aliasing.
PR-URL: https://github.com/libuv/libuv/pull/1211
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Create a dedicated source file to share among platforms on which we find
ifaddrs using the BSD getifaddrs API. De-duplicate our existing copies
of this implementation on such platforms.
PR-URL: https://github.com/libuv/libuv/pull/1240
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
On platforms using getifaddrs we iterate over the interfaces two or
three times. First we count them, then we enumerate them, and then we
fill in physical addresses. Each loop needs to do the same filtering,
so factor out the exclusion test into a helper function for each
platform.
PR-URL: https://github.com/libuv/libuv/pull/1240
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
